HTM Hydraulics Private Limited

DYNEX PF500 SERIES FIXED DISPLACEMENT CHECKBALL PUMPS

0.16 to 0.68 gpm (0,61 to 2,57 L/min) at 1800 rpm
Rated: 10 000 psi (700 bar), Maximum: 15 000 psi (1040 bar)

• Bi-directional rotation providing constant flow direction regardless of drive shaft rotation.
• Shaft Options: Standard keyed, Optional spline.
• Seal Options: Standard Fluorocarbon, Optional EPR seals for use with some phosphate ester fluids, or Fluorocarbon with high pressure shaft seal.
• Split-Flow® models can supply multiple, independent flows from one pump! Multiple flows are achieved by combining the output of individual pistons in various combinations (up to one outlet per piston). This pump has either 3 or 4 pistons depending on the model.

DYNEX PF1000 SERIES FIXED DISPLACEMENT CHECKBALL PUMPS

1.5 to 5.9 gpm (5,7 to 22,3 L/min) at 1800 rpm
Rated: 6 000 psi (420 bar), Maximum: 10 000 psi (700 bar)

• Bi-directional rotation providing constant flow direction regardless of drive shaft rotation.
• Shaft Options: Standard keyed, Optional spline.
• Seal Options: Standard Fluorocarbon, Optional EPR seals for use with some phosphate ester fluids, or Fluorocarbon with high pressure shaft seal.
• Split-Flow® models can supply multiple, independent flows from one pump! Multiple flows are achieved by combining the output of individual pistons in various combinations (up to one outlet per piston). This pump has 4 pistons.

DYNEX PF1300 SERIES FIXED DISPLACEMENT CHECKBALL PUMPS
FOR WATER-BASED FLUIDS

0.31 to 1.42 gpm (1,18 to 5,37 L/min) at 1800 rpm
Maximum: 15 000 psi (1040 bar)

• A wide range of fluid compatibility, for reliable operation with low-lubricity, low viscosity fluids.
• Bi-directional rotation providing constant flow direction regardless of drive shaft rotation.
• Shaft Options: Standard keyed, Optional spline.
• Seal Options: Standard Fluorocarbon, Optional EPR seals for use with some phosphate ester fluids, or Fluorocarbon with high pressure shaft seal.
• Single-fluid design eliminates the need for a lubrication circuit.

DYNEX PF2000 FIXED DISPLACEMENT CHECKBALL PUMPS

2.5 to 8.5 gpm (9,5 to 32,2 L/min) at 1800 rpm
Rated: 3 000 psi (210 bar), Maximum: 10 000 psi (700 bar)

• Contamination tolerant, for operation in dirty environments.
• Bi-directional rotation providing constant flow direction regardless of drive shaft rotation.
• Shaft Options: Standard keyed, Optional spline.
• Seal Options: Standard Fluorocarbon, Optional EPR seals for use with some phosphate ester fluids, or Fluorocarbon with high pressure shaft seal.
• Split-Flow® models can supply multiple, independent flows from one pump! Multiple flows are achieved by combining the output of individual pistons in various combinations (up to one outlet per piston). This pump has 6 pistons

DYNEX PF3000 SERIES FIXED DISPLACEMENT CHECKBALL PUMPS

8.1 to 17.2 gpm (30,7 to 65,1 L/min) at 1800 rpm
Rated: 4 000 psi (275 bar), Maximum: 10 000 psi (700 bar)

• Contamination tolerant, for operation in dirty environments.
• Bi-directional rotation providing constant flow direction regardless of drive shaft rotation.
• Shaft Options: Standard keyed, Optional spline.
• Seal Options: Standard Nitrile, Optional Fluorocarbon, or Optional EPR seals for use with some phosphate ester fluids.
• Split-Flow® models can supply multiple, independent flows from one pump! Multiple flows are achieved by combining the output of individual pistons in various combinations (up to one outlet per piston). This pump has 8 pistons.

DYNEX PF4000 SERIES FIXED DISPLACEMENT CHECKBALL PUMPS

7.7 to 14.0 gpm (29,1 to 53,0 L/min) at 1800 rpm
Rated: 6 000 psi (420 bar), Maximum: 10 000 psi (700 bar)

• Contamination tolerant, for operation in dirty environments.
• A wide range of fluid compatibility, for reliable operation with low-lubricity, low viscosity fluids.
• Bi-directional rotation providing constant flow direction regardless of drive shaft rotation.
• Shaft Options: Standard keyed, Optional spline.
• Seal Options: Standard Nitrile, Optional Fluorocarbon, or Optional EPR seals for use with some phosphate ester fluids.
• Split-Flow® models can supply multiple, independent flows from one pump! Multiple flows are achieved by combining the output of individual pistons in various combinations (up to one outlet per piston). This pump has 10 pistons.

DYNEX PF6000 SERIES FIXED DISPLACEMENT CHECKBALL PUMPS

Flow: 12.7 to 54 gpm (48 to 204,4 L/min) at 1800 rpm
Rated: 5 500 psi (380 bar) – 15 000 psi (1040 bar)
Maximum: 5 500 psi (380 bar) – 15 000 psi (1040 bar)

• Contamination tolerant, for operation in dirty environments.
• Bi-directional rotation providing constant flow direction regardless of drive shaft rotation.
• Shaft Options: Standard keyed, Optional spline.
• Seal Options: Standard Fluorocarbon with high-pressure shaft seal.
• Split-Flow® models can supply multiple, independent flows from one pump! Multiple flows are achieved by combining the output of individual pistons in various combinations (up to one outlet per piston). This pump has either 8 or 10 pistons depending on the model.

DYNEX PF4300 SERIES FIXED DISPLACEMENT CHECKBALL PUMPS FOR WATER-BASED FLUIDS

2.2 to 8.2 gpm (8,3 to 31,0 L/min) at 1800 rpm
Maximum: 15 000 psi (1040 bar)

• Corrosion resistant stainless steel design.
• A wide range of fluid compatibility, for reliable operation with low-lubricity, low viscosity fluids.
• Bi-directional rotation providing constant flow direction regardless of drive shaft rotation.
• Single-fluid design eliminates the need for a lubrication circuit.
• Shaft Options: Standard keyed, Optional spline.
• Seal Options: Standard Fluorocarbon with high-pressure shaft seal.
• Split-Flow® models can supply multiple, independent flows from one pump! Multiple flows are achieved by combining the output of individual pistons in various combinations (up to one outlet per piston).

DYNEX PF4200 SERIES FIXED DISPLACEMENT CHECKBALL PUMPS

2.2 to 6.7 gpm (8,3 to 25,4 L/min) at 1800 rpm
Rated: 8 000 psi (560 bar), Maximum: 20 000 psi (1380 bar)

• A wide range of fluid compatibility, for reliable operation with low-lubricity, low viscosity fluids.
• Bi-directional rotation providing constant flow direction regardless of drive shaft rotation.
• Shaft Options: Standard keyed, Optional spline.
• Seal Options: Standard Fluorocarbon with high-pressure shaft seal. Optional EPR seals for use with some phosphate ester fluids.

DYNEX PV4000 SERIES PRESSURE COMPENSATED CHECKBALL PUMPS

7.3 to 13.7 gpm (27,6 to 51,9 L/min) at 1800 rpm
Rated: 6 000 psi (420 bar), Maximum: 10 000 psi (700 bar)

• Integral pressure compensation for energy efficient performance.
• Contamination tolerant, for operation in dirty environments.
• A wide range of fluid compatibility, for reliable operation with low-lubricity, low viscosity fluids.
• Shaft Options: Standard keyed.
• Seal Options: Standard Nitrile. Optional Fluorocarbon, or Optional EPR seals for use with some phosphate ester fluids.

DYNEX PV6000 SERIES VARIABLE DELIVERY CHECKBALL PUMPS

35.1 to 53.8 gpm (132,9 to 203,7 L/min) at 1800 rpm
Rated: 5 500 psi (380 bar), Maximum: 6 000 psi (420 bar)

• Hydraulically controlled variable delivery.
• Contamination tolerant, for operation in dirty environments.
• These pumps are bi-directional (providing constant flow direction regardless of drive shaft rotation).
• A wide range of fluid compatibility, for reliable operation with low-lubricity, low viscosity fluids.
• Shaft Options: Standard keyed, Optional spline.
• Seal Options: Standard Nitrile. Optional Fluorocarbon, or Optional EPR seals for use with some phosphate ester fluids.
• Split-Flow® models can supply multiple, independent flows from one pump! Multiple flows are achieved by combining the output of individual pistons in various combinations (up to one outlet per piston). This pump has 10 pistons.
• Tandem pump model available.

DYNEX PV6000 SERIES PRESSURE COMPENSATED CHECKBALL PUMPS

31.1 to 61,4 gpm (117,7 to 232,4 L/min) at 1800 rpm
Rated: 6 000 psi (420 bar), Maximum: 8 500 psi (590 bar)

• High-flow, high-pressure.
• Integral pressure compensation for energy efficient performance.
• Contamination tolerant, for operation in dirty environments.
• A wide range of fluid compatibility, for reliable operation with low-lubricity, low viscosity fluids.
• Shaft Options: Standard keyed, Optional spline.
• Seal Options: Standard Fluorocarbon (with high pressure shaft seal), Optional EPR seals for use with some phosphate ester fluids.

DYNEX D03 PATTERN DIRECTIONAL CONTROL VALVES

Nominal Flow: 8 gpm (30 L/min), Max Flow: 15 gpm (57 L/min)
Rated Pressure: 5 000 psi (350 bar)

• Actuators Options include: Manual Lever; Direct Solenoid; Hydraulic Piloted; Air Piloted.
• Exceptionally low pressure drop.
• Full range of Spool types, Actuators, Electrical connections and Solenoid options.

DYNEX D05 – NFPA D05/ISO 05 PATTERN DIRECTIONAL CONTROL VALVES

Nominal Flow: 20 gpm (76 L/min), Max Flow: 40 gpm (152 L/min)
Rated Pressure: 5 000 psi (350 bar)

• Actuator Options include: Manual Lever; Direct Solenoid; Hydraulic Piloted; Air Piloted.
• Exceptionally low pressure drop.
• Full range of Spool types, Actuators, Electrical connections and Solenoid options.

DYNEX MF5000 SERIES VALVEPLATE MOTORS

Pressures to 8000 psi (560 bar). Torque to 4775 lb·in at 5000 psi
(540 N·m at 350 bar).

• Rugged, heavy-duty design.
• Ideal for applications subject to pressure spikes, vibration, constant starting/stopping, and sudden direction reversals.
• Shaft Options: Standard spline, Optional keyed.
• Bi- rotational – shaft rotation is reversed by changing the direction of flow.

DYNEX D08 – NFPA D08/ISO 08 PATTERN DIRECTIONAL
CONTROL VALVES

Nominal Flow: 40 gpm (151 L/min), Max Flow: 90 gpm (341 L/min)
Rated Pressure: 5 000 psi (350 bar)

• Actuator Options include: Manual Lever; Solenoid Piloted; Hydraulic Piloted; Air Piloted.
• Full range of Spool types, Actuators, Electrical connections and Solenoid options.