HTM Hydraulics Private Limited

The DHT 1 Series Digital Hydraulic Testers accurately measure flow, pressure and temperature. The tester is designed to conveniently check the performance of hydraulic pumps, motors, valves and hydrostatic transmissions.
This easy to use diagnostic tester has simplified controls and can pinpoint hydraulic system faults, reducing downtime and helping in preventive maintenance. The tester comprises a turbine flow block and a large easy to read digital display which indicates both flow and temperature.

The tester has a built-in loading valve to simulate the working pressure during normal machine operation. The built-in safety discs protect the machine and operator in event of excessive pressure, allowing oil to safely bypass the loading valve INTERNALLY with no spillage of oil from the hydraulic circuit, eliminating clean-up costs and environmental hazards.

Features:

• Digital display for flow / temp, analogue pressure
• Flow accuracy 1% of full scale
• Easy to use

Specifications:

• Flows up to 400 lpm (100 US gpm)
• Pressures up to 420 bar (6000 psi)
• Temperature up to 120°C (250°F)
• Digital display for flow / temp, analogue pressure
• Flow accuracy 1% of full scale
• Easy to use

 

Additional Information:

• Item Code: DHT-401
• Delivery Time: approx 4-6weeks

Webtec Portable Flow Meter- DHM 4 series. These flow meters are manufactured utilizing optimum quality material and latest technology keeping in mind the set norms of industry.
The DHM 4 series is featured with automatic calculation of hydraulic power and volumetric efficiency. In addition, these flow meters produce an electronic report for immediate email to the customer. This has a Bluetooth feature, which enables it to send the recorded Data to the Phone

Features:

• Produce an electronic report for immediate email to the customer
• Automatic calculation of hydraulic power and volumetric efficiency.
• Record data to robust, non-volatile memory.

Specifications:

• Produce an electronic report for immediate email to the customer
• Flow: 800 lpm (210 US gpm)
• Pressure: 480 bar (7000 psi)
• Accurate measurements and FAST response bar graphs to aid diagnosis.
• Automatic calculation of hydraulic power and volumetric efficiency.
• Record data to robust, non-volatile memory.
• Tester with Record Facility

 

Additional Information:

• Item Code: DHM-404

We are offering our clients a wide range of Mechanical Hydraulic Tester. This hydraulic tester provides the ideal solution for servicing and commissioning hydraulic circuits on agricultural and other mobile machinery. Our offered hydraulic tester is available in numerous specifications as per the needs of customers. This hydraulic tester provides the service engineer with quick, accurate and simple performance testing of motors, valves, pumps, steering systems and complete hydraulic circuits.

Features:

• Pressures up to 420 bar (6000 psi)
• Temperature up to 110°C (230°F)
• Analogue display for flow, pressure and temperature
• Four flow ranges: 30, 60, 120 or 200 lpm (8, 16, 32 or 54 US gpm)
• No batteries required

Technical Specifications:

• Flows up to 200 lpm (54 US gpm)
• Pressures up to 420 bar (6000 psi)
• Temperature up to 110°C (230°F)
• Analogue display for flow, pressure and temperature
• Four flow ranges: 30, 60, 120 or 200 lpm (8, 16, 32 or 54 US gpm)
• No batteries required

Specifications:

• Ambient temperature: -10 to 50 °C (14 - 122 °F)
• Fluid type: Hydraulic oils
• Fluid temperature: 20 to 80 °C (68 - 176 °F) continuous use. Intermittently (< 10 minutes) up to 110 °C (230 °F).
• Maximum pressure: 420 Bar (6000 psi)
• Displays: Pressure and flow 2.5” (63mm) dials Temperature 2” (50mm) long scale 20 to120 °C (68 - 248 °F)
• Accuracy: Flow: ± 4% of full scale Pressure: ± 1.6% of full scale Temperature: ± 2.5 °C (± 5 °F)
• Dimensions:
• 310 x 105 x 120 mm (12-1/4” x 4-1/8” x 4-7/8”)

Weight:

• 6.6 kg (14.5 lbs)

Construction:

• Material Case: Painted steel - removable lid
• RFI body: Aluminium 2011T6
• Load valve body: Aluminium 2011T6
• Internal components: Stainless steel, brass
• Seals: Viton

Additional Information:

• Item Code: RFIK
• Port of Dispatch: U.K
• Delivery Time: Ex- Stock

The Flow Indicators are direct acting & can be installed in hazardous areas or on applications where no power is available. The flow indicator design ensures good reliability and minimises the effects of contamination. The flow indicator consists of a sharp edged orifice and tapered metering piston. The piston movement is directly proportional to flow rate and the sharp edge orifice minimises the effects of viscosity. The piston is magnetically coupled to the rotary pointer assembly which registers on a clear 63mm (2 1/2”) scale displayed in lpm and USgpm.

 

Features:

• Unidirectional
• Flow: 2-180 lpm, 0.5 -48 US gpm
• Pressure :420 bar, 6000 psi
• Optional relay switch
• Built in thermometer
• Available in aluminium for oil, or brass for water
• Large clear dial
• Horizontol or vertical Mounting

 

Functional specification:

• Ambient temperature: -10 to 50°C (14 to 122°F)
• Fluid type: Hydraulic oils
• Fluid temperature: 20 to 80°C (65 - 176°F) continuous use. Intermittently (<10 minutes) up to 110°C (230°F)

Accuracy:

• Flow: ± 4% of full scale
• Temperature: ± 2.5°C (±5°F)

 

Construction material:

• Main block: Aluminium 2011 T3
• Internal parts: Mainly brass
• Seals: Viton

Additional Information:

• Item Code: FI-750

We are recognized as the foremost manufacturer and supplier of High Pressure Flow Indicator. The flow indicator design ensures good reliability and minimises the effects of contamination.. Offered flow indicators are quality checked on several quality parameters to ensure their defect free range. In addition, these flow indicators are designed for continuous monitoring or intermittent use commissioning and servicing hydraulic systems.

Features:

• Built in Thermometer available
• Flow from 10- 180 lpm
• Pressure 350 Bar, 5000 psi
• Accuracy within 4% FSD

Specifications:

• Flow from 10- 180 lpm
• Presuure 350 Bar, 5000 psi
• Built in Thermometer available
• Accuracy within 4% FSD
• Pressure Gauge Port option
• Available in aluminium for oil, or brass for water

Technical Specifications:

• Ambient temperature: -10 to 50°C (14 to 122°F)
• Fluid type: Hydraulic oils
• Fluid temperature: 20 to 80°C (65 - 176°F) continuous use. Intermittently (<10 minutes) up to 110°C (230°F)
• Accuracy Flow: ± 4% of full scale / Temperature: ± 2.5°C (±5°F)
• Dimensions: 199 x 87 x 74mm (7-7/8” x 3-1/2” x 3”)
• Weight: 3.2 kg (7 lbs)
• Construction material:
• Main block: Aluminium 2011T3
• Internal parts: Mainly brass
• Seals: Viton

Additional Information:

• Item Code: FI-750ABOT

Aimed at prosper growth in this field, we are occupied in providing finest quality Digital Pressure Gauge that simultaneously displays peak pressure, actual pressure, battery level and the engineering units selected. These pressure gauges are designed for continuous monitoring of oil, gas, water, hydraulic and other pressure media in mobile equipment, industrial hydraulics, compressors and process control equipment. Offered pressure gauges are quality checked on several quality parameters to ensure their defect free range.

Features:

• Pressures up to 600 bar (8700 psi)
• Peak pressure - 10 ms scan rate
• Back lit display
• Rugged design

Specifications:

• Accuracy (± 0.5% FS)
• Battery operated
• Using the buttons on the front panel the user can clear the peak value, display min, max and actual pressure, reset the zero point and change the engineering units

Additional Information:

• Item Code: HPM-110
• Port of Dispatch: U.K
• Delivery Time: Ex- stock

Webtec Priority Flow Dividers, split a single input (P) flow into a ‘Priority’ (regulated) flow and a ‘By-Pass’ (excess) flow which can be returned directly to the oil reservoir or used to power a second system.
These flow dividers are manufactured with precision utilizing top notch material & latest techniques following the industrial norms.

Features:

• Maximum (working) Pressure: 250 bar (3600 psi)
• Total flow capacity: upto 114 lpm (30 US gpm)
• Material: Steel components in cast iron body painted black; aluminium knob (steel knob optional)
• Weight: 2.10 to 3.50 Kg (4.6 to 7.7 lbs)

Additional Information:

• Item Code: 2FV2V
• Delivery Time: Ex- Stock

Our Flow Hub, can measure and display flow and temperature readings as well as switch and transmit flow values.
Our offered Flow Hub is ideal for condition monitoring, test stands and closed loop control applications both for fluid power and lubrication systems.

Technical Specifications:

• Flows from 1- 360 lpm (100 US gpm)
• Pressure up to 420 bar (6000 psi)
• Accuracy 3% of full scale
• 5 flow sizes range of: 1-360 lpm, 0.25-100 US gpm
• Repeatability better than 1%
• Temperature measurement built-in

Specifications:

• Fluid type: hydraulic oil
• Fluid temperature: 5 to 90 °C (41 - 194 °F) Accuracy: ± 3% of full scale at 21 cSt (higher accuracy on request)
• Repeatability: Better than ± 1%
• Response time: 150 ms (Switch and Transmitter), 50 ms (Ultimate)

Additional Information:

• Item Code: FB
• Port of Dispatch: U.K

Webtec, U.K make Flow Meter, can be installed anywhere in the hydraulic circuit for production testing, and analysis of control systems.
These Flow Meters are Turbine Type Flow Meters with High Accuracy of 1%.

Features:

• Precision Turbine Flow meters- 1% Indicative Reading
• 8 Models cover range, Flow range from 1- 1500 lpm
• Pressure Upto 480 Bar
• Additional Top Ports for pressure and Temperature
• Outputs mA or V

Specifications:

• Accuracy 1% Indicative reading
• Pressure up to 480 bar (7000 psi)
• Temperature up to 90°C (194°F)
• 3 top ports as standard for temperature / pressure
• Bi-directional
• For use with oils, fuels, phosphate-esters BSP or SAE inlet / output ports
• Supply voltage (VS): mA & 5V = 12 - 32 VDC
• Current output: 4 - 20 mA, 3 wire loop, max loop resistance = (VS x 50) - 200 ohms
• Voltage output: 0 - 5 VDC, current consumption = 10 mA, minimum load 20K ohms

Additional Information:

• Item Code: CT-mA

Webtec is specialist manufacturer of hydraulic measurement and control products helping to improve the productivity of heavy machinery.

For 50 years they have been helping customers worldwide in the Industrial, Mobile, and Agricultural sectors to diagnose hydraulic faults, verify hydraulic conditions and achieve repeatable hydraulic control.

The WPB series in-line flow monitors are designed for continuous monitoring or intermittent use for trouble-shooting or commissioning industrial or mobile hydraulic systems.
                    The tubular scale is easily read through the clear polycarbonate window and ensures checks can be made to determine pump performance and setting of flow control valves. The unit is fully sealed for weather tight or wash down applications.
                    Compatibility with hydraulic fluids in mobile, industrial or other applications such as lubrication or coolant systems is not a problem. The WPB series flow monitors do not require straight inlet or outlet piping or require vertical installation. The advanced design of the sharp edged orifice ensures good reliability over a wide viscosity range and minimises the effect of contamination. 

Features

• Economical solution, accuracy 4% FS
• From 0.5 up to 550 lpm at 240 bar
• Flow Switche and transmitter Models available
• Suitable for oil, water - glycol & phosphate ester

 

Specifications:

Measuring accuracy:

• ± 2.5% of full-scale in the centre third of the Measuring range.

• ± 4% of full-scale over the entire scale range

 

Repeatability:

• ± 1% of full scale

 

Maximum operating pressure:

• Aluminium and Brass monitors 240 bar (3000 psi), 
• stainless steel 420 bar (6000 psi)

 

Maximum operating temperature:

• 115° C (240° F) _{higher temperature range avaliable} 

 

Note:

• For operation to 315° C (600° F), a high temperature range is available Pressure differential
• Standard calibration fluids- Oil monitors: DTE 25 @ 43°C (40 cst), 0.873 sg                                                                          Water monitors: Tap water @ 21°C (1 cst), 1.0 sg

Additional Information:

• Item Code: WPB

The WIKA pressure sensors are designed for continuous monitoring of oil, gas, water, hydraulic and other pressure media in mobile equipment, industrial hydraulics, compressors and process control equipment.
Economical price and rugged design allows the WIKA transducers to be designed into O.E.M. machinery to give control and condition monitoring information. The compact construction makes it ideal for installing where space is at a premium. Combined with one of the wide range of Webtec digital readouts both continuous and peak pressures can be measured.

 

• ACCURATE (≤±1% of Full Scale)
• ECONOMICALLY priced
• Rugged design
• OUTPUT: 4 - 20mA
• CONNECTOR: Male 4 pin M12 x1.0
• TWO nominal thread forms available - BSPP & SAE

Additional Information:

• Item Code: WIKA-A-10
• Port of Dispatch: U.K

The Webtec LT10 positive displacement flowmeter with frequency output provides a complete solution to low flow measurement of servo systems, leakage flows, power steering and control systems on fixed and mobile applications. The flowmeter can be installed anywhere in the hydraulic circuit for production testing, commissioning, development testing and control systems.

The compact design allows the LT10 positive displacement flowmeter to be installed where space is limited.

The LT10 positive displacement flowmeter has a frequency output and is the ideal tool for monitoring the performance of pumps, motors, valves and hydrostatic transmissions.

Features:

• Flows from 0.2 to 10 lpm (2.5 US gpm)
• Pressure up to 250 bar (3600 psi)
• Temperature up to 90°C (194°F)
• Accuracy, 1% of full-scale reading*
• Self-energised transducer
• Use with oils, fuels, phosphate-esters

*Accuracy depends on type of readout used

Additional Information:

• Item Code: LT10
• Port of Dispatch: U.K

Temperature sensor with analogue output

TP125-5V / mA

Rugged temperature sensor in a high pressure capsule ideal for hydraulic applications. Linear output makes it ideal for connecting into proprietary displays.

 

• Temperature range: 0 - 150°C (32 - 320°F)
• Max continuous temperature: 125°C (257°F)
• Max pressure: 480 bar (6900 psi)
• Output: Volt and mA versions available
• Thread: 1/4# BSP, 1/4# NPTF, 7/16# UNF
• Connector: Male 4 pin M12 x1.0

 

Ideal for use with CT flow meters or installation direct into a system. Simple to connect to a panel mount readout, PC or PLC.

 

5 Volt obsolete from June 2022. 4-20 mA version remains available.

Additional Information:

• Item Code: Tp125
• Port of Dispatch: U.K

Webtec Hydraulic Data Logger, HPM 4000 series is the Latest Product from Webtec in the range of Datal Loggers.
The HPM4000 is the ideal entry level product for hydraulic fault prevention and diagnostics. It enables a service engineer to connect either two or three sensors simultaneously, depending on the version, and display, data log and export results to HPMComm for further analysis. The

HPM4000 not only allows the user to display actual values, like flow, pressure and temperature but also display peak pressure, and calculate values such as differential pressure and hydraulic power. The rugged handheld unit combines a 3 1/2” square backlit LCD with powerful data logging functionality, 1GB of memory on a nano-USB stick and full device/host USB compatibility.

Features:

• The HPM4000 is the ideal entry level product for hydraulic fault prevention
• Complete range of sensors – pressure, pressure-temperature, flow, temperature, tachometer
• Choose between SR and ID sensors
• Up to 4GB memory and Large 3.5 back lit display
• Connectivity – Nano-USB and USB (cable)
• Complete range of sensors – pressure, flow, temperature, tachometer.
• Intelligent digital sensors (CAN protocol) for easier wiring and auto configuration (HPM4030 only)
• Analogue SR sensors with sensor recognition (HPM4020 only)
• Large 3.5” back-lit display for quick and easy readings
• IP67 rated for use in extreme conditions (HPM4030)

Additional Information:

• Item Code: HPM-4000

Hydraulic Data Logger

HPM7000
The HPM7000 series, is a highly versatile portable hydraulic data logger and the evolution of the HPM6000. It is ideal for diagnostic testing of hydraulic systems, use on hydraulic test benches, pre-dispatch inspection or for Research and Development (R&D). There are a variety of different data logging modes with the ability to data log up to 16 million measured values per test at a variable interval from 1 ms, with a total possible storage size of 12GB (approx. 250 measurements).

The base model: enables you to simultaneously measure up to 48 Webtec CAN channels. Alternatively, up to 5 External CANOpen channels can be connected. Two frequency inputs or Digital Input/ Digital Output are also possible thanks to a dual-function connector.

Modular upgrades: The HPM7000 features a unique modular system which means two input Modules can be added or changed by the user, allowing you to upgrade the device over time to meet the needs of the most demanding application.

The CAN Input Module: allows the connection of up to 48 CAN, CANOpen, J1939 or any mixture of several CAN protocols in a passive way (no power is supplied to the sensors from this module). This allows the user to ‘listen’ to the other CAN signals travelling on a bus, without disturbing them.

The Analogue Input Module: enables back compatibility with sensors that have Sensor Recognition (SR). It also enables connection to current (e.g. 0-20 mA or 4-20 mA) and/or voltage (e.g. 0-5, 0-10 V) sensors.

The 7-inch colour touch display is suitable to use with gloves and additional large tactile buttons at the right of the screen ensure operation even in adverse conditions. The screen can be configured to display the readings in numerical, bar graph, dials and graphical display mode.

Analysis of measurements: can be done thanks to two cursors that can be inserted to obtain measured and delta values. All data can be exported to a PC running HPMComm 7.5 for further analysis or storage off the unit.

Connecting to a PC: USB slave and USB host allow the unit to stream to a PC or laptop and allow for the connection of additional storage. The HPM7000 can also be controlled and monitored remotely using the LAN connection and a VNC remote desktop application which runs on a PC.

The HPM7000 is loaded with technology, yet is simple to configure and easy to use

 

 

• Complete range of sensors - pressure, flow, temperature, RPM, contamination.
• Webtec CAN sensors for plug and play functionality
• Third Party CAN sensors (External CAN) can be displayed and logged. A CAN Monitor assists during installation of CAN channels and analysis of the CAN bus.
• Two slots for Input Modules (CAN/J1939 and Analogue) are availabe on the Base Model. These can be added/changed by the user.
• IP65 and rubberised case surround for protection in harsh evironments
• Complete with HPMComm 7.5 - PC software. Connectivity - USB, Ethernet.

 

Illuminated and anti-glare, 7 inch touch screen colour display.

Foldable stand and VESA-standard points on the back for wall mounting on fix installations (e.g. Test Benches)

The HPM4000 series is a highly versatile entry-level portable hydraulic data logger, ideal for pre-dispatch inspection, preventative maintenance and simple diagnostic fault-finding. There are two models, Sensor Recognition (SR) & Intelligent Digital (ID).

 

• Complete range of sensors – pressure, pressure-temperature, flow, temperature, tachometer
• Choose between SR and ID sensors
• Excellent protection against dust and moisture – rated up to IP67
• Up to 4GB memory
• Connectivity – Nano-USB and USB (cable)
• Complete with HPMComm version 7 Windows™ software

 

See attached accessories bulletin for all available Sensor Recognition (SR) and Intelligent Digital (ID) sensors and cables to measure flow, pressure, temperature and speed.

Rotary Directional Control Valves

180 Series / 280 Series.

 Hydraulic rotary shear directional control valves are the ideal solution for control of hydraulic actuators on mobile and industrial applications where internal leakage must be minimised.

 

• Maximum Pressure: Up to 700 bar, 10,000 psi
• Maximum Flow: Up to 38 lpm, 10 US gpm
• BSP/NPT/SAE ports, or manifold ported to CETOP3/D03/PCD types.
• 180 series-Steel components in aluminium body
• 280 series  Steel components in 316 Stainless Steel body. Nitrile rubber (NBR) Seals
• Maximum tank port pressure 17 bar, 260 psi
• Over 4500 possible configurations

 

The valves utilise an optically flat rotary spool with pressure loaded seats, to ensure either zero or near zero leakage. They have excellent tolerance to contaminates.

Additional Information:

• Item Code: 180

Speed sensor

SP-TTL

Magnetic speed sensor with conditioned TTL output. To measure shaft rotation from a gear.

 

• Frequency up to 2,000 Hz
• 0 - 5 Volt square wave output
• For use with DS130 or C2000
• Measure shaft speed
• Requires a moving ferrite object
• M12 4 pin connection

 

Speed measured by counting teeth on a gear and dividing by n (where gear has n teeth).

Additional Information:

• Item Code: SP-TTL
• Port of Dispatch: U.K

The HV series of loading valve gives smooth progressive pressure control in both flow directions allowing components such as cylinders or motors to be tested without re-plumbing the test connections.

The valve features the exclusive INTERPASS safety disc system which protects the operator, components and the environment by preventing unwanted external oil loss. In the event of overpressure the discs rupture and oil bypasses the valve internally at low pressure.
The valve features a gauge port which is ported to the inlet (in the forward direction). Combined with our flow meters or portable testers, the HV series loading valve makes testing hydraulic components and circuits on a wide range of agricultural, industrial and mobile equipment fast, efficient and safe. Please note that the HV Series are designed for loading a system and are not suitable as a shut-off valve to hold a static load.

Features:

• FLOW: Up to 800 lpm, 210 US gpm
• PRESSURE: Up to 420 bar, 6000 psi
• BI-DIRECTIONAL loading
• INTERPASSTM internal safety protection system with replaceable burst discs
• SMOOTH progressive pressure control
• HIGH tensile aluminium body rated at 6000 psi l EASY to retro-fit.

 

Models:
Flow Port 1 Port2
HV100-B-N-6 :-100 lpm 3/4 BSPP 1/2 BSPP
HV200-B-N-6 :-200 lpm 1-1/16” -12UN #12 SAE ORB 3/4 BSPP

 

Additional Information:

• Item Code: HV100
• Port of Dispatch: U.K